# Open Zen Black & Blue remotely

**URL:** <https://forum.microlist.org/t/open-zen-black-blue-remotely/840>\
**Category:** Software\
**Created:** [January 29, 2020, 3:15pm UTC](https://forum.microlist.org/t/open-zen-black-blue-remotely/840 "2020-01-29T15:15:56Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![LPUoO](https://avatars.discourse-cdn.com/v4/letter/l/9fc348/32.png) [@LPUoO](https://forum.microlist.org/u/LPUoO)\
**Post date:** [January 29, 2020, 3:15pm UTC](https://forum.microlist.org/t/open-zen-black-blue-remotely/840/1 "2020-01-29T15:15:56Z")

</div>

Hi,

Is it possible to open somehow Zen Black & Blue (Zeiss) remotely (using windows remote desktop) in a way that it finds the licence ?

Thanks

---

<div class="post-metadata">

**Author:** ![JASlotman](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.microlist.org/jaslotman/32/331_2.png) [@JASlotman](https://forum.microlist.org/u/JASlotman)\
**Post date:** [January 29, 2020, 3:41pm UTC](https://forum.microlist.org/t/open-zen-black-blue-remotely/840/2 "2020-01-29T15:41:01Z")

</div>

Using a remote desktop something like teamviewer should not give any problems with starting up software on the machine you have a licence on.

---

<div class="post-metadata">

**Author:** ![DrJoelleG](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.microlist.org/drjoelleg/32/433_2.png) [@DrJoelleG](https://forum.microlist.org/u/DrJoelleG)\
**Post date:** [January 29, 2020, 3:54pm UTC](https://forum.microlist.org/t/open-zen-black-blue-remotely/840/3 "2020-01-29T15:54:13Z")

</div>

I’ve found that if I have Zen Black up and loaded on my work PC I can remote in from home and use the modules I need. However…if I start Zen remotely then I can only use basic functions.

---

<div class="post-metadata">

**Author:** ![LPUoO](https://avatars.discourse-cdn.com/v4/letter/l/9fc348/32.png) [@LPUoO](https://forum.microlist.org/u/LPUoO)\
**Post date:** [January 29, 2020, 3:57pm UTC](https://forum.microlist.org/t/open-zen-black-blue-remotely/840/4 "2020-01-29T15:57:59Z")

</div>

Yes, I am in the same situation. But since both Zen Black & Blue have a propensity to crash it is an issue if I can’t open it again.

---

<div class="post-metadata">

**Author:** ![DrJoelleG](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.microlist.org/drjoelleg/32/433_2.png) [@DrJoelleG](https://forum.microlist.org/u/DrJoelleG)\
**Post date:** [January 29, 2020, 4:03pm UTC](https://forum.microlist.org/t/open-zen-black-blue-remotely/840/5 "2020-01-29T16:03:40Z")

</div>

Does Zen crash for you during a particular process or is it random?

I am mainly analysing FCS traces…and as long as I don’t do anything complicated (like FCCS) then I tend to be fine. Might be worth dropping Zeiss an email if its something particular that causes the crash as there may be a useful update out there for you.

My normal back-up is getting a work colleague to reset my PC etc 😉

---

<div class="post-metadata">

**Author:** ![LPUoO](https://avatars.discourse-cdn.com/v4/letter/l/9fc348/32.png) [@LPUoO](https://forum.microlist.org/u/LPUoO)\
**Post date:** [January 29, 2020, 4:13pm UTC](https://forum.microlist.org/t/open-zen-black-blue-remotely/840/6 "2020-01-29T16:13:34Z")

</div>

I tend to open and process very large files (over 60 GB to 1TB) and it sometimes crashes.

---

<div class="post-metadata">

**Author:** ![JASlotman](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.microlist.org/jaslotman/32/331_2.png) [@JASlotman](https://forum.microlist.org/u/JASlotman)\
**Post date:** [January 31, 2020, 12:21pm UTC](https://forum.microlist.org/t/open-zen-black-blue-remotely/840/7 "2020-01-31T12:21:09Z")

</div>

I havent tested this but have you tried opening ZEN from the commandline instead of via a link on the desktop. Windows might handle the two a bit different.

additionally you can specify as which user you want to run it using

runas /user:\<domain\the local machine username\> “c:\ZEN\AIMApplication.exe”

---

<div class="post-metadata">

**Author:** ![NicoDF](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.microlist.org/nicodf/32/375_2.png) [@NicoDF](https://forum.microlist.org/u/NicoDF)\
**Post date:** [February 4, 2020, 3:11pm UTC](https://forum.microlist.org/t/open-zen-black-blue-remotely/840/8 "2020-02-04T15:11:47Z")

</div>

Hi everyone,

I regularly use AnyDesk to access a machine running Zen with licenced modules, without issues. Just have to make sure you set it up to start remote access automatically from a white-listed user. I use that in combination with remote wake-on-LAN to process images when the station is available, usually late hours.

A word of caution: ensure not to use it in a machine that’s being already used to perform acquisition (as could be my case), as you might disrupt ongoing experiments (and certainly annoy colleagues).

Cheers,  
Nico
