# Coverslip holder

**URL:** <https://forum.microlist.org/t/coverslip-holder/1272>\
**Category:** Probes & Prep\
**Created:** [February 2, 2021, 2:54am UTC](https://forum.microlist.org/t/coverslip-holder/1272 "2021-02-02T02:54:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![EricGriffis](https://avatars.discourse-cdn.com/v4/letter/e/58f4c7/32.png) [@EricGriffis](https://forum.microlist.org/u/EricGriffis)\
**Post date:** [February 2, 2021, 2:54am UTC](https://forum.microlist.org/t/coverslip-holder/1272/1 "2021-02-02T02:54:31Z")

</div>

Hi All,  
Does anyone know if anyone makes a drop in adapter that would allow me to place a 24x40mm or 24x50mm coverslip into a form that is 25x75mm that would then fit well into an stage top incubator? I have someone who has microfluidic chambers that they would like to place onto cheaper coverslips rather than having to use 50mm imaging dishes.

Best regards,

Eric

---

<div class="post-metadata">

**Author:** ![pawlowska](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.microlist.org/pawlowska/32/715_2.png) [@pawlowska](https://forum.microlist.org/u/pawlowska)\
**Post date:** [February 10, 2021, 12:34pm UTC](https://forum.microlist.org/t/coverslip-holder/1272/2 "2021-02-10T12:34:38Z")

</div>

Have you thought of 3D printing?