Hardware


Topic Replies Activity
About the Hardware category 1 July 10, 2019
How to evaluate a confocal 1 February 25, 2020
Dust and Yokogawa 13 February 24, 2020
Microscope models for dissected mosquito ovaries! 2 February 19, 2020
Laser for single molecule super res imaging 12 February 18, 2020
Dipping objectives - DI water or PBS? 4 February 14, 2020
TIRF Single Molecule Fluorescence with 488nm - Objective Autofluorescence 4 February 11, 2020
Training courses in optics and hardware for building imaging systems 5 February 10, 2020
Fluorescence bleedthrough from LED in transmitted light path 15 January 17, 2020
Image Acquisition with Micro-Manager in Scanning Confocal Microscopy 5 January 17, 2020
Oil with RI of water for use with Olympus water objective 10 January 8, 2020
Objective warmer on oil objective without temp correction collar 2 January 7, 2020
Transwell migration imaging 2 January 7, 2020
Manual stage and focus drift 5 December 30, 2019
Live cell heat shock on microscope 9 December 19, 2019
Free space vs fiber for high power lasers 6 December 16, 2019
Preventing objective lens damage and over-oiling 6 December 5, 2019
Chromatic abberation APO objectives 4 December 2, 2019
What does HyD Detector gain 2 November 28, 2019
20x Water Dipping Objective 3 November 18, 2019
Test slide for light sheet system 6 October 30, 2019
Looking for feedback on fluorescence slide scanners 14 October 18, 2019
Crest X-light V3 spinning disk confocal reviews 15 October 15, 2019
Leica Thunder and a comparison between 4.2 cmos versus Hamamatsu ORCA-Fusion 15 October 15, 2019
How fast is fast enough for a spinning disk confocal relative to camera speed 4 September 26, 2019
Looking for low cost camera water cooler recommendations 8 September 11, 2019
CAD Designs for Microscopy 11 September 3, 2019
Looking for hardware control of microscope that works with micro-manager and Labview 4 August 19, 2019
Chamlide perfusion operation 3 August 14, 2019
Any experience with solvent resistant materials for sample holding in lightsheet 5 August 5, 2019